LED recessed lights are now commonplace in our houses. Now, whether you are buying them online or at your local home improvement store, you are spoiled for options. Unfortunately, finding the best LED recessed housing amongst a sea of choices can feel like finding a needle in a haystack.
At Electrical Supply Depot, we specialize in providing top-notch LED recessed lighting housing for our customers at an affordable rate. So we know all there is to know about finding the best LED recessed lighting housing, and we thought we should help you find the best ones for your home. In the following passages, you will find the steps to choose recessed lighting housing for yourself. So without further delay, let's check it out!
The modern residential LED recess usually ranges anywhere in between 2-inches and 6-inches. In most homes, you will find a combination of 4-inch and 6-inch lights, and you will find the best one to choose between these two sizes. While you may think 6-inch lights are brighter than 4-inch ones, that was generally true for incandescent recessed ones but isn't for LEDs.
You'll find that many 4-inch LED lights are equivalent to 6-inch lights when it comes to brightness and beam spread. So you see, choosing the size of the LED recessed lights for a room is more of an aesthetic decision than a functional one.
So how to find the best size? Well, you should start with consistency. Now, if you already have recessed lighting in your home, then matching their size for consistency is the best way to go. But that's not set in stone, and you can mix sizes of lights throughout the home. Another way to finding the right size is to consider your visual preference. It would be best always to assess the scale of your room. For large rooms or rooms with tall ceilings, we recommend choosing 6-inch lights for general lighting and 4-inch ones for task and accent lighting.
Now, if you have sloped ceilings, you can consider 4-inch adjustable lights over 6-inch adjustable ones because they are less obtrusive. One thing you should remember about LED recessed light housing is that if the label says it's a "4-inch" or "6-inch" recessed light, then you should know it's the measurement across the inside of the housing with the trim removed.
The Type Of LED Recessed Lighting
When looking for the type of LED primary recessed light, there are two options. Fixed Recessed Lights and Adjustable Recessed Lights. Here is what you need to know about the two types of primary LED recessed lighting:
- Fixed Recessed Lights: The standard LED recessed lights with the lens sitting recessed inside the trim are not movable. If the aperture is smooth, they call it a reflector trim, but if it has ridges, then it's known as a baffle trim.
- Adjustable Recessed Lights: Adjustable recessed lights are also known as Gimbal downlights, where the lens sits slightly recessed and is attached to an axis. It allows it to tilt inside the trim, typically up to 35-degrees.
So these are the primary types of LED recessed lighting, but those aren't the only ones out there. Here are some other types of LED recessed lighting you should know about!
Different Types of LED Recessed Lights
So there are two other types of LED recessed lights that you need to know about, which are usually for more specialty applications. Those lights are called thin or slim recessed lights and fully adjustable or elbow recessed lights. Technically none of those two types of lights are recessed LED lights, and they are actually surface lights. Here is more about the two so that you know what to choose for your home:
- Ultra-Thin or Slim Recessed Lights: These are the newest types of light to hit the market, and as the name suggests, these are ultra-thin, and they don't use the housing. These lights are "canless" led lights and have a remote junction box that houses the wiring and connections. The best part about them is that they fit almost anywhere, so you don't have to worry about clearance from the ceiling joists above. However, there is a downside to these types of lights. They can produce unwanted glare because the lens sits flush with the ceiling surface.
- Fully Adjustable or Elbow Recessed Lights: The fully adjustable or elbow recessed lights adjust from flat to around 75-degrees and rotate 360-degrees. These lights provide fantastic flexibility in aiming for accent and artwork, but these lights protrude from the ceiling, making them more noticeable than a standard adjustable recessed light. You should reserve this light for situations where placement or ceiling angle requires more flexibility than a standard adjustable recessed light can provide.
How To Choose The Best Type Of LED Recessed Lighting For A Room?
Whenever you choose an LED recessed light for your room, you have to make those choices based on the ceiling type and the purpose of the lighting. Here is more about the types of ceilings and how they could inform you about the types of LED light you should choose:
- Flat Ceilings: We recommend using fixed recessed lights for general and task lighting if you have flat ceilings. It would be best to use adjustable recessed lights when you want to direct the light towards an object or wall for accent lighting. You should reserve the use of ultra-thin recessed lights for rooms where you will be directly under the lights. Keep in mind that if you are using these lights in long-shaped rooms or open floor plans, the glare of the surface LED lights can seem too harsh when you look across the ceiling.
- Sloped Ceilings: With sloped ceilings, we recommend using adjustable recessed lights for general and task lighting. We recommend using adjustable lights because they can be directed downward rather than following the angle of the ceiling like fixed lights would. Remember to aim the lights downward with the lens parallel to the floor will minimize glare, especially when the seating in the room is facing the slope of the ceiling. However, we don't recommend using recessed lights for accent lighting from sloped ceilings.
The Color Temperature
CCT or Correlated color temperature is the color appearance of the white light measured in Kelvins (K). Now, people often confuse color temperature with brightness, but they aren't the same. Instead, color temperature refers to the color tone of the light. Here are some of the most common color temperatures you will find:
- warm white (2700K),
- soft white (3000K),
- neutral white (3500K),
- bright white (4000K),
- And daylight (5000K).
Now, that's not all you need to know about LED recessed light color temperature. In the following passages, we will dive deeper into it. So let's check it out!
Color Temperature and Dimming
If you are used to dimming incandescent bulbs, you will notice that LED lights don't behave in the same way when dimmed. The primary difference is that the color temperature of an incandescent light gets warmer as it is dimmed, going from 2700K at full brightness to around 2200K when dimmed very low.
However, you have to keep in mind that they don't naturally change the color temperature as they are dimmed, and you have the same color temperature throughout the dimming range. Now, we aren't saying it's a bad thing, but it's different if you aren't accustomed to it.
Warm Dim LEDs
Many manufacturers out there create LED recessed lights that mimic the warm glow of incandescent light when dimmed. Those lights offer "Warm Dim" or "Warm Glow," where the color temperature changes from 2700K to 2200K when dimmed. It's the perfect lighting option to create a warm and cozy atmosphere at low light levels.
Selectable/Tunable White LEDs
One of the best things about LED recessed lighting is the "Selectable" or "Tunable" White LED lights. The fixtures on these lights have an integrated switch on the trim or junction box, which allows you to adjust the settings in steps between various color temperatures. With this, you will no longer need to choose the CCT of the recessed light before you purchase it.
Choosing The Color Temperature
As you can see, the color temperature has a significant impact on your room's lighting. If you have a warmer light within the 2700K-3000K range, it will make the room feel cozy, whereas cooler temperatures like 3500K-4000K will feel bright and energetic. That's the reason why we usually recommend choosing LED recessed lights that are of a tunable white.
That way, you will be able to install the lights and adjust the color temperature to your liking based on how it looks and feels in the room. Of course, you can vary the color temperature between rooms, but you should stay warmer or cooler within one or two steps of the general choice.
The Brightness In Recessed LED Lighting
Remember that the brightness in LED recessed lights is measured in lumens and not in Watts like the incandescent lamps. So make sure you don't compare watts between LED lights for brightness. With LED lights, you have to keep in mind that some are more efficient than others and therefore use fewer watts to produce the same or more lumens.
When choosing lights for general lighting, we recommend selecting lights with at least 600 lumens for standard height ceilings and at least 900 lumens for tall ceilings. Remember to have a dimmer switch installed that way, and it won't matter if you chose one with higher lumen output.
Quality Of The Light
If you want to know the light's ability to display colors accurately in comparison to an ideal or natural light source, then you have to check out its color rendering index (CRI). You have to make sure to use a LED recessed light with a high CRI so that colors appear as they were intended. Make sure to choose your LED recessed lights that have a CRI of 90 or higher.
The beam angle is the part of the recessed LED where the concentration of light is 50% or greater. Usually, recessed LED lights have an extensive beam angle that is typically above 90-degrees and is perfect for spreading light.
However, keep in mind that too wide of an angle can cause excessive glare when looking across a ceiling. Now, you won't find too many options for beam angles with LED recessed lights. If you are looking for recessed LED lighting with beam angles, look for LEDs labeled "Flood" or "Spot" lights, and for general lighting, we recommend you use the flood type.
The Best Place For LEDs With Recessed Housing
So there you go, those are the steps you can follow to find the best-LED lights with recessed housing. As you can see, it's straightforward to choose high-quality LED lighting with recessed housing. First, however, you need to know where to find them, and that's where Electrical Supply Depot comes in. Our list of LED lights with recessed housing is one of the best in the market, and we can hook you up quickly.
So if you are looking for LEDs with recessed housing or any other electrical supply, then feel free to get in touch with us, and we will help you out. Also, if you have any questions regarding electrical items and equipment, then drop them in the comments below, and we will answer them all for you. And with that being said, that's about all we have for you today. We will come back with something new for you soon. Until then, see ya!