Ideal Electrical Tools & Equipment To Have In Your Tool Belt!

Posted by Freelancers HUB on

Whenever workers need to do a good job, they need to rely on accuracy, resiliency, craftsmanship, comfort, and safety tools. That includes electricians as well. Their job is to keep homes illuminated, connected, and energy-efficient. 

At Electric Supply Depot, we specialize in providing our customers with high-quality ideal electrical tools and equipment at affordable rates. So we know all about the essential tools you need to have in your tool belt, and we thought we should help you out. In the following passages, we will list the ideal electrical tools you should have. The list will include:

  • Basic electrical maintenance tools
  • Essential electrician tools
  • Electrician tools for staying safe
  • High-tech electrician tools

So without further delay, let’s start the guide and help you find the ideal electrical tools and equipment for your tool belt!

Basic Electrical Maintenance Tools

Ideal Electrical Tools You Need!

Essential maintenance is one of the most vital parts of the electrical world and having the right maintenance tools in your tool belt is critical. Here are the crucial electrical maintenance tools you need to have!


Pliers are often called cutting pliers or lineman pliers and are an essential part of electrical maintenance. The primary use of pliers is cutting wire or gripping, twisting, bending, or straightening wires. Any electrician worth their salt will have a wide range of pliers in their toolbox including items like needle nose pliers, side-cutting pliers, and remaining pliers for tightening locknuts, fittings, and caps.


Screwdrivers are another toolbox necessity, and electricians need a wide range of screwdrivers in their arsenal to work diligently. They need it for loosening and fastening various pieces of hardware. That’s why most professionals nowadays carry versatile and adaptable screwdrivers with interchangeable bits. It’s the perfect tool to have so that no one's ever stuck without the proper electrical maintenance tool. 

Electrical Contractor Software

Long gone are the days where you would haul a clipboard around and burdening homeowners with crinkled, scribbled-on estimates and invoices. That’s why professionals are utilizing the help of a comprehensive, cloud-based residential and commercial services software solution. Nowadays, electricians are armed with the right digital electrical software that makes customer service, estimates, sales, and invoicing simple and easy.

Tape Measure

Measurements should always be exact when it comes to cutting and stripping for electrical wiring. A simple retractable tape goes a long way into helping in that regard. In addition, we recommend you get a model with magnetic tips, multi-step locks, and other features to make things easier on you. 

Electrical Tape

The electrical tape is made from plastic, vinyl, or fiberglass cloth. It is an adhesive material and is pressure-sensitive and essential for insulating wires or other materials that conduct electricity. Its job is to prevent electrical current from accidentally passing to other cables and possible electrocution when touching live wires.

Cable Ties

Cable ties, aka zip ties, are inexpensive fasteners that are great at binding electrical cables or wires together. These will help keep your electrical space neat and organized with cable ties.

Electric Drill

Whether you need to install new lighting fixtures or disassemble installed hardware to access wiring or other electrical components, you will need an electric drill. A handheld model with various bits will help you expedite tasks and ensure you can use them for multiple purposes for industry-specific jobs.


Whenever you are installing light fixtures, you need to find precise points for placement. No electrical tool belt is complete without a standard level because it ensures fixtures, screws, and other installations are placed precisely where they need to be.

Essential Electrician Tools

So now that you know the essential maintenance tools, the next thing we will cover is the vital electrical tools you need to have in your tool belt. So let’s check them out!

Wire/Cable Lugs

Wire/cable lugs work just like jumper cables and car batteries, and they connect to wires to appliances, lines, and other devices in need of power.

Coax Connector

The purpose of coax connectors is to link cables to devices while also protecting the cable from shredding. There is a wide range of coax connectors, and when you have a variety of them on hand, it will ensure you always meet your customers’ needs.

Wire Strippers

Electricians regularly strip the plastic coating on wires to expose the copper and make customized connections with other wiring or components. That’s why wire strippers are an essential electrical maintenance tool, and they come in a variety of models and types.

Fish Tape

If you ask any electrician, they will say that a must-have in their tool belt is fish tape. Fish tapes are used to run wiring between gang boxes or other electrical components through conduit piping. These are housed in a retractable coil and are fed through installed conduit piping. 

You put the fish tape through one side of the wiring conduit and then bring it out through the other side. Once the end of the fish tape appears on the other side, you can attach the wire to the end and have the tape retract, pulling the wire along the conduit.

Fishing Rods

These are essential electrician tools that you need to have when installing wire through walls, below carpets, or above ceilings. These rods are typically made up of fiberglass and include hooks on end for easy maneuvering.

Terminal Block

Terminal blocks are modular, insulated devices that assist electricians when grouping multiple wires. It’s used to connect wiring to the ground or connect electrical switches and outlets to mains.

Voltage Tester

To ensure the safety of electricians when working, the power must be cut off in certain sections of the property, and it’s usually the circuit breaker. That’s what a handheld voltage tester is for. It allows electricians to test outlets for power and informs them whether or not it’s safe to work on. Electricians can also use the voltage tester to check if power has been restored.

Reaming Bit

Whenever you install new conduits when replacing new ones, you have to connect piping segments to create a wiring route between electrical components. That’s where the reaming bit comes in. First, it attaches to an electric drill and widens the opening on one end of the piping. Then, it ensures connection to another segment of piping and completes a secure conduit.

Conduit Bender

Whenever any electrician finds out the wiring route, they will run wiring along the corner of the wall or in primarily other hidden areas. Conduit benders are what the electricians use to curve conduit piping. It helps accommodate these routes and ensures the conduits remain nonintrusive and are efficiently placed in the customer’s home.

Splicing Connector

Splicing connectors are plastic clips that help electricians make quick connections with multiple pieces of wire. You can use it with numerous cables, including device wires, telephone cables, and electrical cables. 


No electrician should be working in the dark. It's a potential hazard, and that’s why flashlights are an essential electrical tool for every electrician. Whenever you are working on electrical things, you have to make sure to keep flashlights, and other various work lights handy and within reach. 

Safety Tools

Now that you know the basics and the essentials of the trade, the next step is the most important one, and it’s your safety. Here is a list of ideal electrical safety tools you need to have with you!

Insulated Gloves

Electrocution is one of the most significant hazards when working with electricity and when operating precautions are a must. That’s why you have to wear insulated gloves as it provides another layer of protection. Make sure you have them added to your electrical maintenance tool belt. These gloves come in various styles for fit and comfort, so you can choose whichever type fits you best. 

Flame Retardant Work Shirt

Every electrical professional takes precautions against dangerous arc flashes, electrocutions, and fires. The first step of training professionals is to wear work shirts made with fire-resistant material to prevent serious burn injuries. Whenever you are working with electrical wiring, you have to wear flame-retardant work shirts to ensure your safety.

Safety Glasses

Every electrician needs to protect their eyes when closely examining electrical wiring or operating power tools. That’s why everyone needs a pair of safety glasses on hand at every job site. So make sure you add this ideal electrical tool to your tool belt. 

Rescue Rod/Hook

Rescue rods or hooks are an essential item to have for everyone who works with electricity. These are used to remove large objects or unconscious people who have been electrocuted from a hazardous area. That’s because dangerous electrical currents may still be live, and emergency first responders have to use the rescue rod to pull a victim away from the electrical source without getting electrocuted.

High-Tech Electrician Tools

So that covers the basic, essential, and safety tools you need to have in your possession, but those are not all the things you should have. Here are high-tech electrician tools you need to have as well!

Circuit Analyzers

These are digital handheld electrician tools that provide virtually instant information about the circuit connected to an individual outlet. You will get instant information about voltage, polarity, line voltage, reversals, and many others. 

Circuit Finders

It’s often hard to find out which outlets are connected to which circuits in a house, and that’s why modern electricians use circuit finders. These tools come with two main components; a handheld digital transmitter and a tiny receiver that plug into outlets around the home. So whenever you hold up the transmitter to circuits in the breaker, it then sends a signal to the receiver and indicates which circuit the outlet belongs to.

The Best Place To Buy New Electrical Tools

So there you go; those are the ideal electrical tools and equipment you need to have in your toolbox or belt. Remember, these are all essential items, and you need them all if you are thinking about working with electrical outlets. Now, if you don’t have all of these or need to replace your old ones, then Electrical Supply Depot can help you out. 

We have a curated list of essential electrical tools and equipment that will help you tackle any electrical need, so be sure to contact us, and we will help you out. Also, if you have any questions regarding electrical tools and equipment, then drop them in the comments below or hit us up on our socials, and we will answer them all for you. And with that being said, that’s about all we have for you today. We will come back with something new for you soon. Until then, see ya!

Share this post

← Older Post Newer Post →